robg88's beasty.

Like Neily's Alloys? Think its about time that Dave started the resto on his Saloon? Tell them here.

Moderator: Moderators

robg88's beasty.

Postby Gordo » 30 Jan 2010, 07:17

Rob, what's the PCD of the 4HA at the moment? If it's the Ford 4 1/4" you may want to contact TJM as he had some Ford PCD alloy hubs made up and may have some left.
Hate to say it, but the Ford PCD will open up the range of wheels diameters, widths and offsets that can be utilised.
ttfn

Gordo
Gordo
Classic Old Timer
Classic Old Timer
 
Posts: 523
Joined: 27 Dec 2006, 07:58
Location: Auckland, New Zealand

Postby robg88 » 30 Jan 2010, 15:11

The axle came off a jaguar so the PCD was 5 x 120mm I think, I did try to find some scimitar hubs but had no luck :(
robg88
`L` Plate Newbie
`L` Plate Newbie
 
Posts: 19
Joined: 05 Dec 2007, 17:15

Postby Gordo » 30 Jan 2010, 15:33

Jag's should be 5 x 4 3/4" - same as Chev's and, I believe, BMWs

4 3/4" is 120.65mm! I assume they're really both 4 3/4"?

TJM has 5x120mm alloy hubs for BMWs.

Still a big range for those and reasonably cheap, ex USA.
ttfn

Gordo
Gordo
Classic Old Timer
Classic Old Timer
 
Posts: 523
Joined: 27 Dec 2006, 07:58
Location: Auckland, New Zealand

Postby robg88 » 30 Jan 2010, 18:05

Yeah, they are 120.65mm x 5 sorry.
I was thinking of using the hubs as they are, but want to run the car on 13" wheels, and I couldn't find any 13" wheels with the pcd of the hubs.
robg88
`L` Plate Newbie
`L` Plate Newbie
 
Posts: 19
Joined: 05 Dec 2007, 17:15

Postby TJM » 30 Jan 2010, 19:43

I am getting a batch of 5x120PCD hubs made at the moment and can easily make a pair of 5 x 4.75" if required.

Price £80 each plus P&P.

Regards
Tim
TJM
Advanced Motorist
Advanced Motorist
 
Posts: 445
Joined: 25 Nov 2004, 20:16
Location: Bridgend, Glamorgan

Postby Herbie_Flowers » 31 Jan 2010, 02:52

robg88 wrote:I did try to find some scimitar hubs but had no luck :(

I've got a 4ha that came off a scimitar, apparently, how would I be able to confirm it? You can have my hubs as I can't be bothered to redo the P.C.D and would rather make new ones :wink:
User avatar
Herbie_Flowers
Diehard Chevetter
Diehard Chevetter
 
Posts: 1638
Joined: 30 Mar 2005, 06:55
Location: Telford

Postby Gordo » 31 Jan 2010, 11:09

Herbie_Flowers wrote:
robg88 wrote:I did try to find some scimitar hubs but had no luck :(

I've got a 4ha that came off a scimitar, apparently, how would I be able to confirm it? You can have my hubs as I can't be bothered to redo the P.C.D and would rather make new ones :wink:


Most sources have the Scimitar as being 4x4 1/2".
ttfn

Gordo
Gordo
Classic Old Timer
Classic Old Timer
 
Posts: 523
Joined: 27 Dec 2006, 07:58
Location: Auckland, New Zealand

Postby robg88 » 31 Jan 2010, 11:50

Yeah, and usually on the diff cover there's the watts linkage.
Would be great if I could have the hubs off you! How much would you want for them?
robg88
`L` Plate Newbie
`L` Plate Newbie
 
Posts: 19
Joined: 05 Dec 2007, 17:15


Return to Members Cars Discussion

Who is online

Users browsing this forum: No registered users and 0 guests

cron