Chevette HSR Body Spec's ????

All the bits that rust!

Moderator: Moderators

Chevette HSR Body Spec's ????

Postby Daishag » 15 Jan 2009, 20:59

I have decided to prep a shell i have found to original HSR Tarmac Competition Spec, i have the Sports Parts Manual but this dosent list the spec's of the changes / drawings etc that the works cars / shells had when converted to full HSR Spec.
Does any one have these specs / drawings especially the rear end ie tall turrets spec's and dimension's the false floor large transmission tunnel at the rear or diff tunnel etc etc and the dimensions for the X-Member being moved forward to make it a LWB spec etc

Cheers Dave aka Daishag Rallying 07835971713
If aint sideways you are'nt trying hard enough.
Daishag
Advanced Motorist
Advanced Motorist
 
Posts: 100
Joined: 20 Sep 2006, 23:11
Location: N.Wales

Postby Gordo » 16 Jan 2009, 07:23

There was a linky someone posted recently to a company that does the HSR spec panel work, such as tall damper towers, tunnels, link boxes etc. May not help if you want to do the fab' work yourself, though.
ttfn

Gordo
Gordo
Classic Old Timer
Classic Old Timer
 
Posts: 523
Joined: 27 Dec 2006, 07:58
Location: Auckland, New Zealand

Postby Daishag » 16 Jan 2009, 21:43

No that would be great if i can buy the body mod's all ready done its the actuall dimension's of where they mount proper etc etc i was after actually. I don't mind purchasing the bits slowly and doing the work at the end of the summer all in one hit etc etc.

Cheers Dave aka Daishag Rallying 07835971713
If aint sideways you are'nt trying hard enough.
Daishag
Advanced Motorist
Advanced Motorist
 
Posts: 100
Joined: 20 Sep 2006, 23:11
Location: N.Wales

Postby Gordo » 17 Jan 2009, 08:46

Here you go
http://www.ekmpowershop2.com/ekmps/shop ... s-20-c.asp

Have a look around their site, some impressive work!
http://www.prepfab.co.uk/chevettehsr.htm
ttfn

Gordo
Gordo
Classic Old Timer
Classic Old Timer
 
Posts: 523
Joined: 27 Dec 2006, 07:58
Location: Auckland, New Zealand

Postby Daishag » 17 Jan 2009, 21:39

Ah yes the holy grail PREPFAB motorsport what can i say but i better cut the credit card up otherwise i will be in serious trouble LOL !!!!!!!

Cheers Dave 07835971713
If aint sideways you are'nt trying hard enough.
Daishag
Advanced Motorist
Advanced Motorist
 
Posts: 100
Joined: 20 Sep 2006, 23:11
Location: N.Wales

Postby Gordo » 18 Jan 2009, 09:10

Get a debit card - can't spend what you don't have, that way!
ttfn

Gordo
Gordo
Classic Old Timer
Classic Old Timer
 
Posts: 523
Joined: 27 Dec 2006, 07:58
Location: Auckland, New Zealand


Return to Bodywork & fittings

Who is online

Users browsing this forum: No registered users and 0 guests

cron