Replacing dials???

If it`s got wires, it`ll be in here.

Moderator: Moderators

Replacing dials???

Postby Raver » 10 Mar 2005, 18:26

hiya guys was just wonderin how easy it is to replace the dials in a chevette as the ones in there at the mo look like a crappy diy jobbie so wasnted to replace them, any idea's??
User avatar
Raver
Advanced Motorist
Advanced Motorist
 
Posts: 216
Joined: 26 Jan 2005, 20:35
Location: Staffordshire

Postby Shellysowner » 10 Mar 2005, 18:47

The difficult bit is getting the actual console out of the dashboard and also re-connecting the speedo cable. The rest should be pretty straightforward. All the dials unscrew individually and the wiring is simple.
User avatar
Shellysowner
Neverending moaner - lack of space!
Neverending moaner - lack of space!
 
Posts: 4384
Joined: 08 Jan 2005, 01:50
Location: Cambridge

Postby Neilyman » 10 Mar 2005, 18:50

Quick tip for refitting speedo cable.............
If you get under the car, drivers side, there is a `P` clip securing the speedo cable screwed to the edge of the tunnel. Undo that & pull the cable out of the dash to connect it up. Put the clocks back & the cable will go back then refit the `P` clip.
Image
User avatar
Neilyman
Admin and dirty rotten egg!
Admin and dirty rotten egg!
 
Posts: 2834
Joined: 21 Nov 2004, 17:20
Location: West Yorkshire, UK


Return to Electrical

Who is online

Users browsing this forum: No registered users and 1 guest