FRONT VALANCE

All the bits that rust!

Moderator: Moderators

FRONT VALANCE

Postby verticallychallenged » 17 Apr 2007, 23:12

i am looking for a front valnce (air dam, ground efect) what ever you may call it

for a 76 usa chevette

can anyone point me in the right direction
User avatar
verticallychallenged
`L` Plate Newbie
`L` Plate Newbie
 
Posts: 12
Joined: 02 Nov 2006, 02:20
Location: USA Ohio

Postby CancerWagon » 19 Apr 2007, 05:21

Like this? (the only local chevette in a local scrapyard)

Image

I'll go see if it's in good nick next week if you're interested.
Chris W.
Drifting in a 55 hp Diesel... what?
"Erfolg durch Qualität."
User avatar
CancerWagon
Classic Old Timer
Classic Old Timer
 
Posts: 698
Joined: 02 Sep 2006, 04:33
Location: Halifax.NS.CA

Postby verticallychallenged » 19 Apr 2007, 21:20

dosnt look like there is much left on that one

i am interested in one


does anyone know what years interchange with a 76 us chevette?

i know they changed them in the early 80s
User avatar
verticallychallenged
`L` Plate Newbie
`L` Plate Newbie
 
Posts: 12
Joined: 02 Nov 2006, 02:20
Location: USA Ohio

Postby CancerWagon » 20 Apr 2007, 06:29

the plastic valance kicked in for 1984.

The metal smaller one (with the longer front fender/wings) was from 1976-93
Chris W.
Drifting in a 55 hp Diesel... what?
"Erfolg durch Qualität."
User avatar
CancerWagon
Classic Old Timer
Classic Old Timer
 
Posts: 698
Joined: 02 Sep 2006, 04:33
Location: Halifax.NS.CA

Postby verticallychallenged » 20 Apr 2007, 10:41

isnt there 2 differant metal ones?

one comes up the fender further than the other?

i have seen some that come nearly half way up the fend, above the bumper.

the one i need is even with the underside of the bumper where it bolts up.
User avatar
verticallychallenged
`L` Plate Newbie
`L` Plate Newbie
 
Posts: 12
Joined: 02 Nov 2006, 02:20
Location: USA Ohio

Postby CancerWagon » 22 Apr 2007, 07:56

I'll check and see monday. I'm going to look at the doors on that car. (and possibly the torque tube.
Chris W.
Drifting in a 55 hp Diesel... what?
"Erfolg durch Qualität."
User avatar
CancerWagon
Classic Old Timer
Classic Old Timer
 
Posts: 698
Joined: 02 Sep 2006, 04:33
Location: Halifax.NS.CA


Return to Bodywork & fittings

Who is online

Users browsing this forum: No registered users and 1 guest

cron