plastic vents/fllaps on the c pillar (saloon)

All the bits that rust!

Moderator: Moderators

plastic vents/fllaps on the c pillar (saloon)

Postby jifop » 06 Jan 2006, 12:06

They are different between 4 door and 2 door arnt they? or am i just mad?
Before you say anything..... no i cant spell or type!

The post above is my own personal opinion, it is not meant to upset or cause offence, if it does bugger off.

Tim
jifop
Rust Junkie
Rust Junkie
 
Posts: 1276
Joined: 07 Feb 2005, 15:17
Location: hertfordshire

Postby penski » 06 Jan 2006, 12:22

I don't know...but I'm mising a nearside one.

Well...the plastic pegs have snapped on it...and I haven't fixed it yet.

*n
YOUUUUUUUUUUUU JUICER!
penski
Advanced Motorist
Advanced Motorist
 
Posts: 250
Joined: 09 Aug 2005, 11:42
Location: NE3

Postby Doive » 06 Jan 2006, 12:33

No, they are all the same. the only ones that are different are on the earlier chevettes they are pressed metal flaps, while on the later cars like mine they are injection moulded plastic. Should be easy enough to track down a replacement, there are a few saloons being broken at the moment.
<img src="http://sfx-images.mozilla.org/affiliates/Buttons/firefox2/firefox-spread-btn-1b.png">

Med Venlig Hilsen

www.doive.co.uk
User avatar
Doive
Pyrotechnic Nutter Admin
Pyrotechnic Nutter Admin
 
Posts: 4357
Joined: 22 Nov 2004, 18:43
Location: Clinging to a Turbine, Hexham

Postby jifop » 06 Jan 2006, 13:51

ahhhh ta, really need a passenger side one! have contacted loadsa sellers but no joy yet!
Before you say anything..... no i cant spell or type!

The post above is my own personal opinion, it is not meant to upset or cause offence, if it does bugger off.

Tim
jifop
Rust Junkie
Rust Junkie
 
Posts: 1276
Joined: 07 Feb 2005, 15:17
Location: hertfordshire

Postby shuvit-tim » 06 Jan 2006, 20:00

no joy with the guy i got the engine i'm afraid, he sold it on ebay already!
when all else fails, rivets, cable ties and bodge tape will see you through

Tim
User avatar
shuvit-tim
Tight arsed, ex-Stoodant Chevetter
Tight arsed, ex-Stoodant Chevetter
 
Posts: 2466
Joined: 22 Nov 2004, 23:31
Location: worcester / warrington, UK


Return to Bodywork & fittings

Who is online

Users browsing this forum: No registered users and 1 guest

cron