Manta 'B' axle fitment

Will they fit?...find out here!

Moderator: Moderators

Manta 'B' axle fitment

Postby Herbie_Flowers » 15 Nov 2005, 03:06

i've searched the forum but have not had any satisfying answers so, does anyone know how to fit a Manta 'B' axle to the Chevette and would they be willing to write a comprehensive guide on how to do it......please.
just a few things though -
1 - i'd like to use coilovers if i can get them.
2 - i don't want to shorten the axle.
3 - i'd like to do away with the torque tube.
User avatar
Herbie_Flowers
Diehard Chevetter
Diehard Chevetter
 
Posts: 1638
Joined: 30 Mar 2005, 06:55
Location: Telford

Postby Shoveitpusher » 15 Nov 2005, 10:01

fitting is the same as for an a series axle:

for coil overs you will need a stronger turret capable of taking the loads, like an escort. shortening the axle would be a bit expensive anyway.

torque tube. at present there is still no definative answer, my next step will be to find a drive flange to fit the pinion, thoughs are it could be the flange off the end of the current tube.
Peter C
Shoveitpusher
Classic Old Timer
Classic Old Timer
 
Posts: 812
Joined: 22 Nov 2004, 19:16
Location: Norfolk

Postby CR500Dom » 15 Nov 2005, 10:22

shoveitpusher wrote:fitting is the same as for an a series axle:



Which is ?
Can you point me in the right direction, as I have just bought an A series Manta Axle :wink:
CR500Dom
Upsetter of "The Purists"
Upsetter of "The Purists"
 
Posts: 420
Joined: 07 Oct 2005, 08:53
Location: Norwich, Norfolk

Postby Herbie_Flowers » 15 Nov 2005, 12:16

shoveitpusher wrote:for coil overs you will need a stronger turret capable of taking the loads, like an escort.

thanks for the reply Peter but would double skinned saloon turrets be sufficient do you think?
i need to find an engineering job quick cos the "foreigners/developments" are building up fast and i can't do them :cry:




CR500Dom wrote:Which is ?
Can you point me in the right direction, as I have just bought an A series Manta Axle :wink:

try this thread or look in the Sportpart manual.
User avatar
Herbie_Flowers
Diehard Chevetter
Diehard Chevetter
 
Posts: 1638
Joined: 30 Mar 2005, 06:55
Location: Telford

Postby Shoveitpusher » 16 Nov 2005, 12:08

with my engineers hat on i'd have to say no.
mainly because you need enough space to get the spring top in the turret.
secondly the method of securing the damper top is not really good enough to control spring forces as well (though a mini rr coil over conversion does use the standard fitting)

Dom do a search on the site, it is in here somewhere. it involves moving damper mounts and possibly panhard rod mounts but sonce mine came fitted i haven't taken a lot of notice.
Peter C
Shoveitpusher
Classic Old Timer
Classic Old Timer
 
Posts: 812
Joined: 22 Nov 2004, 19:16
Location: Norfolk


Return to Wheels, Tyres & Axles

Who is online

Users browsing this forum: No registered users and 1 guest

cron